| 序号 |
标准编号 |
标准名称 |
标准英文名称 |
| 1 |
NB/T 31106-2016 |
陆上风电场工程安全文明施工规范 |
Code for Safe and Civilized Construction of Onshore Wind Power
Projects |
| 2 |
NB/T 35040-2014 |
水力发电厂供暖通风与空气调节设计规范 |
Design Code for Heating Ventilation and Air Conditioning of
Hydropower Plants |
| 3 |
NB/T 35042-2014 |
水力发电厂通信设计规范 |
Design Code of Communication for Hydroelectric Power Plants |
| 4 |
NB/T 35044-2014 |
水力发电厂厂用电设计规程 |
Specification for Designing Service Power System for Hydropower
Station |
| 5 |
NB/T 35009-2013 |
抽水蓄能电站选点规划编制规范 |
Specification on Compiling Site Selection Planning for Pumped
Storage Power Stations |
| 6 |
NB 35011-2016 |
水电站厂房设计规范 |
Design Code for Powerhouses of Hydropower Stations |
| 7 |
NB/T 35090-2016 |
水电站地下厂房设计规范 |
Design Code for Underground Powerhouses of Hydropower Stations |
| 8 |
NB/T 35087-2016 |
水电工程钢闸门液压自动挂脱梁系列参数 |
Series parameters of hydraulically operated and automatically
engaged or disengaged beams for hoisting steel gates in hydropower
projects |
| 9 |
NB/T 47043-2014 |
锅炉钢结构制造技术规范 |
Technical specification for manufacture of boiler steel structures |
| 10 |
NB/T 20005.4-2012 |
压水堆核电厂用碳钢和低合金钢 第4部分：主蒸汽系统、主给水流量控制系统、辅助给水系统和汽轮机旁路系统用锻、轧件 |
Carbon steel and low alloy steel for pressurized water reactor
nuclear power plants—Part 4: The forged or rolled parts for use in
main steam systems, feedwater flow control systems, auxiliary
feedwater systems and turbine bypass systems |
| 11 |
NB/T 20005.5-2013 |
压水堆核电厂用碳钢和低合金钢 第5部分：1、2、3级承压铸件 |
Carbon steel and low alloy steel for pressurized water reactor
nuclear power plants—Part 5: Class 1, 2 and 3 pressure retaining
castings |
| 12 |
NB/T 20005.9-2017 |
压水堆核电厂用碳钢和低合金钢 第9部分：2、3级无缝钢管 |
Carbon steel and low alloy steel for pressurized water reactor
nuclear power plants—Part 9: Class 2 and 3 seamless steel pipes and
tubes |
| 13 |
NB/T 20005.12-2017 |
压水堆核电厂用碳钢和低合金钢 第12部分：主蒸汽系统、主给水流量控制系统、辅助给水系统和汽轮机旁路系统用无缝钢管 |
Carbon steel and low alloy steel for pressurized water reactor
nuclear power plants—Part 12: Seamless pipes for main steam
systems,feedwater flow control systems, auxiliary feedwater systems
and turbine bypass systems |
| 14 |
NB/T 20005.13-2012 |
压水堆核电厂用碳钢和低合金钢 第13部分：2、3级热交换器传热管用无缝冷拔钢管 |
Carbon steel and low alloy steel for pressurized water reactor
nuclear power plants—Part 13：Cold-drawn seamless steel tubes for
class 2 and 3 heat exchangers |
| 15 |
NB/T 20005.14-2012 |
压水堆核电厂用碳钢和低合金钢 第14部分：2、3级对焊无缝管件 |
Carbon steel and low alloy steel for pressurized water reactor
nuclear power plants—Part 14: Class 2 and 3 butt-welding seamless
pipe fittings |
| 16 |
NB/T 20005.16-2012 |
压水堆核电厂用碳钢和低合金钢 第16部分：主蒸汽系统用弯头 |
Carbon steel and low alloy steel for pressurized water reactor
nuclear power plants—Part 16: Elbows for main steam systems |
| 17 |
NB/T 20005.17-2014 |
压水堆核电厂用碳钢和低合金钢 第17部分：主蒸汽系统用推制弯头 |
Carbon steel and low alloy steel for pressurized water reactor
nuclear power plants—Part 17: Push-bended elbows for main steam
systems |
| 18 |
NB/T 20007.8-2017 |
压水堆核电厂用不锈钢 第8部分：1、2、3级奥氏体不锈钢无缝钢管 |
Stainless steel for pressurized water reactor nuclear power
plants—Part8：Class 1, 2 and 3 austenitic stainless steel seamless
pipes and tubes |
| 19 |
NB/T 20007.9-2011 |
压水堆核电厂用不锈钢 第9部分：1、2、3级奥氏体不锈钢对焊无缝管件 |
Stainless steel for pressurized water reactor nuclear power plants—
Part 9: Class 1, 2 and 3 austenitic stainless steel seamless
butt-welding pipe fittings |
| 20 |
NB/T 20007.10-2013 |
压水堆核电厂用不锈钢 第10部分：2、3级热交换器传热管用冷轧、冷拔奥氏体不锈钢无缝钢管 |
Stainless steel for pressurized water reactor nuclear power plants
—Part 10: Cold rolled or cold drawn seamless austenitic stainless
steel tubes for class 2 and 3 heat exchangers |
| 21 |
NB/T 20007.20-2013 |
压水堆核电厂用不锈钢 第20部分：泵用马氏体不锈钢A、B、C类非承压铸造内件 |
Stainless steel for pressurized water reactor nuclear power
plants—Part 20: Martensitic stainless steel castings for
non-pressure-retaining category A, B and C internal parts for pumps |
| 22 |
NB/T 20007.28-2014 |
压水堆核电厂用不锈钢 第28部分：3级耐海水腐蚀奥氏体-铁素体双相不锈钢承压铸件 |
Stainless steel for pressurized water reactor nuclear power
plants—Part 28: Class 3 pressure-retaining austenitic-ferritic
duplex stainless steel castings for seawater application |
| 23 |
NB/T 20007.29-2014 |
压水堆核电厂用不锈钢 第29部分：泵用奥氏体-铁素体双相不锈钢A、B、C类非承压铸件 |
Stainless steel for pressurized water reactor nuclear power
plants—Part 29：Non-pressure-retaining category A, B and C
austenitic—ferritic duplex stainless steel castings for pumps |
| 24 |
NB/T 20008.13-2013 |
压水堆核电厂用其他材料 第13部分：1、2、3级螺柱、螺栓、螺钉、螺杆和螺母 |
Other material for pressurized water reactor nuclear power
plants—Part 13: Class 1, 2 and 3 studs, bolts, screws, threaded rods
and nuts |
| 25 |
NB/T 20045-2011 |
压水堆核电厂反应堆压力容器安装及验收技术规程 |
Technical Regulation for Construction and Acceptance of the Reactor
Vessel Installation in PWR Nuclear Power Plant |
| 26 |
NB/T 20046-2011 |
压水堆核电厂蒸汽发生器安装及验收技术规程 |
Technical Regulation for Construction and Acceptance of Steam
Generator Installation in PWR Nuclear Power Plant |
| 27 |
NB/T 20107-2012 |
压水堆核电厂反应堆冷却剂泵安装技术规程 |
Technical Regulation for Construction of Reactor Coolant Pump
Installation in PWR Nuclear Power Plant |
| 28 |
NB/T 20378-2016 |
核电厂屏蔽混凝土配合比设计规程 |
Specification for Mix Proportion Design of Shielding Concrete for
Nuclear Power Plant |
| 29 |
NB/T 20391-2016 |
压水堆核电厂钢制安全壳组装、安装及验收技术规程 |
Technical Specification for Assembly, Installation and Acceptance of
Steel Containment Vessel in PWR Nuclear Power Plants |
| 30 |
NB/T 20410-2017 |
核电工程纤维混凝土技术规程 |
TechnicalSpecification for Fiber ReinforcedConcrete in Nuclear Power
Engineering |
| 31 |
NB/T 20560.6-2019 |
压水堆核电厂应急堆芯冷却系统过滤器设计和性能评价 第6部分：化学效应试验技术要求 |
Design and Performance Evaluation of Emergency Core Cooling System
Strainer for Pressurized Water Reactor Nuclear Power Plant Part 6:
Technical Requirements for Chemical Effects Testing |
| 32 |
NB/T 20005.2-2012 |
压水堆核电厂用碳钢和低合金钢 第2部分：2、3级热交换器管板锻件 |
Carbon steel and low alloy steel for pressurized water reactor
nuclear power plants—Part 2：Forgings for class 2 and 3 heat
exchanger tube plates |
| 33 |
NB/T 20005.10-2013 |
压水堆核电厂用碳钢和低合金钢 第10部分：用填充金属焊接的2、3级钢管 |
Carbon steel and low alloy steel for pressurized water reactor
nuclear power plants—Part 10: Class 2 and 3 pipes welded with filler
metal |
| 34 |
NB/T 20005.15-2013 |
压水堆核电厂用碳钢和低合金钢 第15部分：用填充金属焊接的2、3级管件 |
Carbon steel and low alloy steel for pressurized water reactor
nuclear power plants—Part 15: Class 2 and 3 pipe fittings welded
with filler metal |
| 35 |
NB/T 20555-2019 |
核电厂老化与寿命管理术语 |
Terminology of ageing and life management for nuclear power plants |
| 36 |
NB/T 20564-2019 |
压水堆核电厂辐照燃料组件池边检查 |
Poolside inspection of irradiated fuel assembly in pressure water
reactor nuclear power plant |
| 37 |
NB/T 20565-2019 |
压水堆核电厂燃料组件用锆合金棒材和丝材 |
Zirconium alloy bars and wires for fuel assembly for pressurized
water reactor nuclear power plants |
| 38 |
NB/T 20566-2019 |
压水堆燃料组件及相关组件抗震设计规范 |
Code for seismic design of fuel assembly and associated core
components in pressurized water reactors |
| 39 |
NB/T 20344-2015 |
核电厂安全级电子设备鉴定规程 |
Qualification procedure of safety class electronic equipment for
nuclear power plants |
